Surge Protectors
UPS & Surge
- Mfr Part Number: SMART1000RM1U
- Voltage compatibility: 120 V AC
- Frequency compatibility: 60 Hz
- Output:
- Output volt amp capacity: 1000 VA
- Output watt capacity: 640 watts
- Output nominal voltage: 120 V AC
- Output voltage regulation: Line mode - Sine wave line voltage 120V (-21% +8%); Battery mode - Sine wave output within 5% of 120VAC
- Output frequency regulation: Line mode - Passes line frequency of 60Hz +/-10%; Battery mode - Inverter output regulated to 60Hz +/-0.5Hz
- Outlet quantity / type: 6x NEMA 5-15R
- Overload protection: Via 15A input breaker
- Input:
- Maximum input amps: 9.2 A
- Input connection type: NEMA 5-15P
- Input cord length: 10 ft., 14 gauge
- Recommended electrical service: 15A 120V
- Battery:
- Full load runtime: 10 minutes (640 watts)
- Half load runtime: 13 minutes (320 watts)
- DC system voltage: 24 V DC
- Typical battery lifespan: 3~6 years, depending on usage
- Battery recharge rate: 2~4 hours to 90%
- Voltage Regulation:
- Overvoltage correction: Input voltages between 128 and 147 are reduced by 12%
- Brownout correction: Input voltages between 83 and 107 are boosted by 14%
- Surge / Noise Suppression:
- AC surge suppression: 480 joules
- AC suppression response time: Instantaneous
- EMI / RFI AC noise suppression: Yes
- Communications:
- Network monitoring port: 2x built-in monitoring ports; 1x USB; 1x DB9
- SNMP compatibility: Built-in accessory slot accommodates internal SNMP / Web card and other network accessories
- WatchDog compatibility: Yes
- Line / Battery Transfer:
- Transfer time from line power to battery mode: 2~4 milliseconds
- Low voltage transfer to battery power: 83V (resets to line power as line voltage increases to 87V or higher)
- High voltage transfer to battery power: 147V (resets to line power as line voltage decreases to 143V or lower)
- Certifications: UL1778 (USA), cUL (Canada), FCC Class A (emissions), NOM (Mexico)
- Special Features:
- EPO port: Includes RJ11 EPO (emergency power off) port and cable
- TVSS grounding: Includes back panel grounding point with thumbscrew for data line surge suppressors and other network accessories requiring a safe grounding point
- Cold Start: Yes, inverter can be "cold started" to enable temporary AC output during a power failure
- Appearance: Attractive black color scheme
- Material of construction: Steel
- Form factors supported: Rack/Tower (1U)
- Cooling method: Built-in cooling fan
- Battery Access: Battery access door allows hot swap battery replacement without powering connected equipment off
- Dimensions (WxDxH): 17.5 x 16.75 x 1.75 inch / 44.5 x 42.5 x 4.45 cm
- Weight: 32 lbs / 14.5 kg
|
|
|
