Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
Output over voltage, short circuit, and over current protection
100% Hi-pot, ATE, and burn-in tested
Re-settable power shut down
Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report)
Input:
Input Range: 95~132/190~264V AC, Manual selection
Frequency: 47~63Hz
Input Current: 6A (RMS) @115V AC, 3A (RMS) @230V AC
Inrush Current: 50A Max for 132V AC Cold start
Output:
Total Watts: 180 W
+5V and +3.3V total output not exceed 118W
+3.3V, +5V, and +12V total output cannot exceed 165W
When +3.3Vis load on 16.7A, the +5V maximum load is 12.6A
When +3.3Vis load on 11.5A, the +5V maximum load is 16A
Dielectric Withstand: Input to frame ground 1800V AC for 1 second
Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
Rise Time: Less than 20ms on all output
Hold-up Time: 16.6ms minimum at nominal input voltage
Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
Leakage Current: Less than 3.5mA
MTBF: 100,000 hours on maximum load at +25°C
Dimension (WxLxH): 5 x 4 x 3 inch / 125 x 100 x 76.40 mm
Why can't I see the price?
This display appears for low price items and indicates that additional discount is applicable on adding the item to the Shopping Cart. You can view the discounted price by selecting the item and then adding the item to cart. Adding the item to cart does not imply that you are obliged to buy it – you can always delete the item from your cart if you decide not to buy it.