Sparkle 400W 1U PSU Power Supply

Sparkle 400W 1U PSU Power Supply
List Price: $100.95
Qty: 

Specification

  • POW-SPK-4001UB
  • Sparkle
  • PS-FSP400-621U
  • In Stock (Usually ships within 1 business day)
  • ComponentsPower Supplies

Description

Features
  • Complied with EPS1U standard
  • Active Power Factor Correction Meeting with EN61000-3-2
  • High efficiency and reliability
  • Remote On/Off function
  • Internal 12V DC fan included
  • Noise Killer (Thermal fan speed control function)
  • Low noise and ripple
  • Complies with FCC part 15 subpart J Class B and CISPR 22 Class B
  • Output over voltage, short circuit, and over current protection
  • 100% Hi-pot, ATE, and burn-in tested
  • Re-settable power shut down
  • Approved by UL 1950, CSA C22.2 Level 3, TUV EN60950 or VDE EN60950, NEMKO EN60950 (CB Report), CE
Specifications
  • Temperature Range: Operating 0° C ~ +50° C on full load; storage & shipping -20° C ~ +80° C
  • Humidity: 95% on operating and 95% on storage
  • Dielectric Withstand: Input to frame ground 1800V AC for 1 second
  • Efficiency: 65% at minimum measured at nominal AC main voltage and frequency with maximum load on all output
  • Rise Time: Less than 50ms
  • Hold-up Time: 18ms minimum at nominal input voltage
  • Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible)
  • Leakage Current: Not exceed 0.75mA at 115V AC, 60Hz
  • MTBF: 100,000 hours on maximum load at +25° C degree
  • Dimension (WxHxL): 106x40x300mm/4.2”x1.6”x11.8” inches
Input Characteristics
  • Input Range: 90~265V AC, Full Range Input
  • Frequency: 47~63Hz
  • Input Current: 9A (RMS) @115V AC, 5A (RMS) @230V AC
  • Inrush Current: 80A Max for 115V AC, 120A Max for 230V AC Cold start
Output Characteristics*
Output Voltage Minimum Load Maximum Load Load Reg. Line Reg. Ripple & Noise
+3.3V 0.5A 30.0A +5%/-4% ±1% 50mV P-P
+5V 0.5A 30.0A +5%/-4% ±1% 50mV P-P
+12V1 1.0A 14.0A +5%/-4% ±1% 120mV P-P
+12V2 1.0A 12.0A +5%/-4% ±1% 120mV P-P
-5V 0.0A 0.3A ±10% ±1% 120mV P-P
-12V 0.0A 0.8A +9%/-5% ±2% 120mV P-P
+5Vsb 0.0A 2.0A +5%/-4% ±1% 50mV P-P
*+5V and +3.3V total output not exceed 200W
*+3.3V, +5V, and +12V total output cannot exceed 380W

Why can't I see the price?

This display appears for low price items and indicates that additional discount is applicable on adding the item to the Shopping Cart. You can view the discounted price by selecting the item and then adding the item to cart. Adding the item to cart does not imply that you are obliged to buy it you can always delete the item from your cart if you decide not to buy it.